931-815-3260 Mon - Thurs 6:30 A.M - 5:30 P.M. CST

FORD 557 Stroker Turn Key Race Crate Engine 900 HP

Be the first to review this product

Availability: In stock


Quick Overview

COMPLETE 557 STROKER FORD TURN KEY RACE CRATE ENGINE Motor makes 900 HP 760 TQ 13.5:1 Compression

Big Block Ford 557 Race Engine

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Ford 557 Top View
  • Big Block Ford 557 Race Engine
  • Ford 557 Short Block
  • Ford 557 Short Block
  • Ford 557 Short Block
  • KAASE Oil Pump
  • 557 Race Long Block
  • Ford 557 Top End
  • Ford 557
  • Ported BBF Intake
  • Ford 557 Race Engine
  • Ford 557 Race Engine Dyno Test


New Ford A460 Race Engine Block
  • Bored 4.440"
  • Torque plate honed (represents head being torqued to block)
  • New Wide Performance cam bearings installed
  • New screw in freeze plugs installed
  • All New oil galley plugs installed
  • Painted color choice w/High Heat Paint
Rotating assembly
  • Eagle  4.500" stroke crankshaft
  • Eagle  4340 H-beam 6.700" rods
  • Clevite Hardened Rod & Main Bearings
  • Mahle Forged Pistons Flat Top pistons 13.5:1 compression
  • Mahle Performance File Fit Rings
  • All Rods big & small ends and Pistons machined to same weight
  • Rotating assembly ballanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)
Trick Flow Power Port CNC Poted  Cylinder Heads
  • 78cc CNC combustion chambers
  • 325cc intake runners
  • Bronze valve guides
  • Hardened valve seats
  • 2.250" and 1.760"  Race Series Stainless Steel valves
  • Comp Cams Roller valve springs
  • Comp Cams Titanium retainers
  • Comp Cams 10 degree hardened keepers
  • ARP Head Studs
Camshaft specs
  • Comp Cams Custom Solid Roller Cam 
  • Crower Hippo Solid Roller Lifters  
  • Comp Cams Cam Retain Plate
  • ARP 7/16 Screw in studs
  • Comp Cams 7/16 Guide plates
  • Smith Brothers hardened pushrods
  • Crower 1.8  full roller race series rocker arms with poly locks
  • Lunati Stud Girdle
  • Trick Flow Billet True Double Roller timing set
  • Dorman Timing Cover
  • Dorman fuel pump ecentric kit
Fuel System
  • Quick Fuel 4500 1250FX Carburetor
  • Trick Flow Mafia 4500 Fully Ported Intake
  • Engine Works Carburetor Studs

Also included

  • Moroso 8qt street strip rear sump oil pan & pickup
  • Kasse Bullet Proof Casting, Dual Oil Feed oil pump
  • Milodon Hardned oil pump shaft  
  • Fel-Pro  Head Gaskets
  • Fel-Pro  Timing Cover Gaskets & Rear Main Gasket
  • Fel-Pro  Intake Gaskets
  • Fel-Pro  Oil Pan Gasket
  • Canton Fabricated Aluminum Valve Covers
  • Fel Pro Valve Cover Gaskets
  • PowerBond SFI Approved  Harmonic Ballancer
  • ARP Blancer Bolt   
  • Stainless Steel new oil pan,timing cover,& intake bolts  kit

Engine makes 900 horsepower @ 7000 RPM and 760 ft lbs of torque @ 5800 RPM

This are actual Dyno Numbers not exagerated or severly altered dyno numbers like most.We do not set our dyno to show more that it should.

This engine is Dyno Tested and run through the break in process.We will have the carburetor jetted & tuned in with the correct timming set.

It will include

  • MSD Pro Billet Distributor
  • MSD Bronze Distributor Gear 
  • CSR Distributor hold down
  • NGK Spark Plugs
  • Ford Racing 9mm Plug Wires
  • Oil will be removed for shipping purposes

Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines to others it would be like apples to oranges. They just aren't the same.


Once purchased engine usually ships in 6-8 weeks time (excluding factory backorders)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.