931-815-3260 Mon - Thurs 6:30 A.M - 5:30 P.M. CST

Ford 460 Stroker Turn Key Crate Engine 625 HP

Be the first to review this product

Availability: In stock


Quick Overview


460 Stroker Turn Key Crate Engine

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 460 Stroker Turn Key Crate Engine
  • Thermal Clean 460 Block
  • Bore Cylinders BBF Engine
  • Torque Plate Hone
  • Align Hone
  • Computer Balance Rotating Assembly
  • Degree Camshaft
  • 460 Stroker Short Block
  • BBF Short Block
  • 514 Stroker Dyno Test


Specifications with top of line high QUALITY parts
Ford 460 Engine Block
  • Thermal Cleaned & shot blasted
  • Magnufluxed
  • Bored 4.440"
  • Torque plate honed (represents head being torqued to block)
  • New wide performance cam bearings installed
  • New Brass freeze plugs installed
  • All New oil galley plugs installed
  • Painted color choice w/High Heat Paint


  Rotating assembly

  • Eagle 4340 Steel 4.150" stroke crankshaft
  • Eagle 4340 H-beam 6.700" rods
  • Clevite Hardened Rod & Main Bearings
  • Mahle Forged Pistons -28cc pistons 10.5:1 compression
  • Mahlel File Fit Rings
  • All Rods big & small ends and Pistons machined to same weight
  • Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)


  Trick Flow Power Port Cylinder Heads

  • 74cc combustion chambers
  • 290cc intake runners
  • Bronze valve guides
  • Hardened valve seats
  • Straight plug design
  • 2.200" and 1.760" Ferrea 5000 Stainless Steel valves
  • Roller valve springs
  • Titanium retainers
  • 10 degree hardened keepers
  • ARP Head Bolts


  Camshaft specs
  • Comp Custom Solid Roller Street Cam 
  • Advertised Duration 286 Intake 292 Exhaust
  • Duration @ .050"  248/254
  • 3000 to 7000 RPM
  • .664 / .671 lift with 1.73 rocker arms
  • Crower Sever Duty Hipo Solid Roller Lifters (a must for solid roller street applications)
  • Comp Cams7/16 Screw in studs
  • Comp Cams 7/16 Guide plates
  • Smith Brothers Pro Series 4130 .080" wall hardened pushrods
  • Comp Cams Ultra Pro Magnum 1.7  full roller rocker arms with poly locks (lifetime guarantee)
  • Engine Works Billet True Double Roller timing set
  • Timing Cover w/fuel pump eccentrics


Fuel System
  • Quick Fuel 850cfm Carburetor
  • Edelbrock Performer RPM Air Gap Intake
  • Engine Works Carburetor Studs


Also included

  • Milodon / Moroso 8qt street strip front or rear sump oil pan & pickup or equivalent to your application
  • Melling High Performance oil pump
  • Melling Hardned oil pump shaft  
  • Fel-Pro  Head Gaskets
  • Fel-Pro  Timing Cover Gaskets & Rear Main Gasket
  • Fel-Pro  Intake Gaskets
  • Fel-Pro  Oil Pan Gasket
  • Precision Race Engines Logo or Ford Polished Aluminum Tall Valve Covers
  • Billet push in breathers
  • Fel Pro Valve Cover Gaskets
  • PowerBond  Harmonic Ballancer
  • Mr Gasket Blancer Bolt   
  • Stainless Steel new oil pan,timing cover,& intake bolts  kit


It will include

  • MSD  Pro Billet Distributor
  • Distributor hold down
  • NGK Spark Plugs
  • Ford Racing 9mm Plug Wires
  • Brad Penn oil will be removed for shipping purposes

This engine is Dyno Tested and run through the break in process.We will have the carburetor jetted & tuned in with the correct timming set.


Engine makes 625+ horsepower @ 5500 RPM and 635+ ft lbs of torque @ 4500 RPM (10.5:1 compression on pump gas)

Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines to others it would be like apples to oranges. They just aren't the same.

Engine includes 1 year warranty & lifetime customer service!

Once purchased engine usually ships in 6-8 weeks time (excluding factory backorders) 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.