Details
- Bore 4.600"
- Torque plate honed (represents head being torqued to block)
- New LSM 60mm Roller Cam bearings installed
- New Brass freeze plugs installed
- All New oil galley plugs installed
- All new dowel pins installed
- Painted with High Heat Paint (color choice)
- Callies Magnum 4340 Steel 4.750" stroke crankshaft
- Oliver Billet Steel 7.000 rods
- Clevite Race Series Hardened Rod & Main Bearings
- Ross Custom 4.600" Forged Pistons
- Ross Race rings
- All Rods big & small ends and Pistons machined to same weight
- Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)
- 68cc combustion chambers
- 475cc intake runners
- Brodix 2.520" Titanium and 1.860" Stainless valves
- Comp Cams triple roller valve springs,Titanium retainers,and hardened keepers
- Brodix Head Studs
- LSM Custom 60mm Solid Roller Cam
- Crower .937" Offset Severe Duty Solid Roller Lifters with high pressure pin oiling
- Smith Brothers Custom hardened pushrods
- Jesel Pro Series Shaft Mounter Rocker Arms
- Jesel Belt Drive Timing Set
- Brodix Spread Port Intake
- Carburetor Studs
- Quick Fuel 1450 (gas) Dominator Carb
Also included
- 5 stage Dry Oil System Package
- Fel-Pro Multi-Layerd Steel Head Gaskets
- Fel-Pro Timing Cover Gaskets & Rear Main Gasket
- Brodix Intake Gaskets
- Brodix valve cover gaskets
- Fel-Pro Oil Pan Gasket
- Brodix Fabricated Aluminum Tall Valve Covers
- Pro Race SFI Approved Harmonic Balancer
- ARP Balancer Bolt
- All new stainless steel oil pan,timing cover,& intake bolts
It will include
- MSD Crank Trigger Distributor
- MSD BBC Crank Trigger Kit
- Billet Distributor Clamp
- NGK Spark Plugs
- MSD 8.5mm Super Conductor Plug Wires
- The Brad Penn Oil will be removed for shipping purposes
This engine is Dyno Tested and run through the break in process. Engine makes 1250 horsepower @ 7700 RPM and 970 ft lbs of torque @ 6300 RPM. We will have the carburetor jetted & tuned in with the correct timing set for maximum HP.
Engine is professional race prep assembled in controlled environment. Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play. Piston clearance on cylinder, piston to valve, & deck clearance checked & set. Head cc's are checked. Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct valve train geometry. Oil pump pickup clearance set for proper oiling. Each bolt is torqued to proper specifications using top quality calibrated torque wrench. You can not compare our engines to others it would be like apples to oranges. They just aren't the same.
Engine includes limited warranty & lifetime customer service!
Once purchased engine usually ships in 8-10 weeks time (excluding factory backorders)
Check items to add to the cart or select all
You have no items in your shopping cart.
