931-815-3260 Mon - Thurs 6:30 A.M - 5:30 P.M. CST

Ford 351W Stroker Turn Key Crate Engine Mild Street 500 HP

Be the first to review this product

Availability: In stock


Quick Overview

NEW Ford 408W Stroker Dart Turn Key Mild Street Crate Engine 500hp

408W Crate Engine

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 408W Crate Engine
  • 408W Bore
  • 408W Torque Plate Hone
  • Knotching For Stroker Crank
  • 351W Alighn Hone
  • 408 Balance


This engines specifications with top of line high QUALITY parts
Ford 351W Block
  • Bored & Torque plate honed (represents head being torqued to block)
  • Square Decked
  • Align Honed w/ Canton Main Girdle & ARP main studs
  • New cam bearings installed
  • New Brass freeze plugs installed
  • All New oil galley plugs and dowel pins installed
  • Painted color choice


Rotating assembly
  • Eagle 4340 crankshaft 4.00" stroke 
  • Eagle 4340 H-beam rods 6.200" long
  • Clevite Rod &  Main Bearings
  • MAHLE Forged  Pistons (10.5:1 compression run on pump fuel)
  • MAHLE Rings
  • All Rods big & small ends and Pistons machined to same weight
  • Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)
  • Assembled and all tolerances checked


Cylinder Heads & Camshaft

  • Brodix Track 1 Aluminum cylinder heads
  • 2.08"& 1.600" ss valves
  • Hardened retainers & 10°  Locks                                                    
  • Matching Valve Springs
  • 195cc intake runners
  • Comp Cams Screw In Studs & Guide Plates
  • Trick Flow Hydraulic Roller Camshaft (298/325 advertised Duration 574/.595 Lift)
  • Trick Flow Roller Lifters
  • Comp Cams Ultra Pro Magnum 1.6 Full Roller Rockers (lifetime guarantee)
  • Engine Works True Double Roller Timing Set w/ torington bearing
  • New Timing Cover
  • Smith Brothers Pro Series 4130 .080" wall Hardened Pushrods
  • Edelbrock  Air Gap Intake
  • Quick Fuel Hot Rod Series 750cfm Carburetor
  • EW  Carburetor Stud Kit


Also Included

  • Melling Oil Pump
  • Melling hardened oil pump shaft
  • OEM chrome or painted oil pan, pickup, & dipstick
  • PowerBond Harmonic Balancer & MR Gasket Bolt
  • New SS Bolt Kit
  • ARP Head Bolts
  • Fel-Pro Head Gaskets
  • Fel-Pro Oil Pan Gasket
  • Fel-Pro Valve Cover Gasket
  • Fel-Pro Intake Gasket
  • Fel-Pro Timing Cover & Rear Main Gasket Kit
  • Pro Billet Distributor
  • Chrome Distributor Hold Down
  • Ford Motorsports 9mm Plug Wires
  • NGK Spark Plugs
  • Ford Racing Aluminum Valve Covers
  • Polished push in breathers
  • Brad Penn Break-in Oil is drained for shipping


Engine will be actually dyno tested and makes 500 hp @ 5500 &  500 Ft Lbs Torque @ 4000


Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines to others it would be like apples to oranges. They just aren't the same.

Engine includes 1 year warranty & lifetime customer service!

Once purchased engine usually ships in 6-8 weeks time (excluding factory backorders)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.