Questions? 931-815-3260 Mon-Fri 8am-4pm CST

Mopar 383 Stroker Turn Key Crate Engine 560 HP

Availability: In stock

$15,400.00

Quick Overview

Mopar Chrysler Plymouth Dodge 383 Stroker 489 Complete Crate Engine --- Dyno Tested 560 HP 608 TQ




Mopar 383 Stroker Crate Engine

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Thermal Clean Big Block Mopar
  • Boring BB Mopar Block
  • Totque Plate Hone
  • Align Hone Plymouth 383  Block
  • Decking Dodge 383 Block
  • Computer Balancing
  • Mopar 383 Dyno Test
  • Chrysler 383 Long Block
  • Mopar 383 Stroker Crate Engine
$15,400.00

Details

This engines specifications with top of line high QUALITY parts
 
Mopar Chrysler Dodge 383 B block
  • Thermal cleaned and shot peened
  • Sonic Tested For Cylinder Wall Thickness
  • Magnafluxed
  • Bored 4.280"
  • Torque plate honed (represents head being torqued to block)
  • Align honed (main bore housing where crank goes)
  • Decked for flat head surface  
  • New cam bearings installed
  • New Brass freeze plugs installed
  • New oil galley plugs installed
  • New Dowels Installed
  • Painted Color Choice

 

Rotating assembly
  • 4340 Steel 4.250" stroke internal balance crankshaft
  • H- beam 6.535 " 4340 rods
  • Clevite Rod & Main Bearings
  • Dimond Forged Flat Top Pistons
  • Total Seal Rings
  • All Rods & Pistons matched & machined to same weight (big & small ends as well as total weight)
  • Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)
  • New Rear Main Seal Retain Plate & Bolts

 

 
Edelbrock Performer RPM Aluminum Cylinder Heads
  • 84cc combustion chambers
  • 210cc intake runners
  • Bronze valve guides
  • Hardened valve seats
  • Straight plug design
  • 2.140" and 1.810" Ferra Stainless Steel 5000 series valves
  • Teflon valve seals
  • Matching roller springs,hardened retainers,and hardened keepers to camshaft
  • ARP Head Bolts
  • Fel-Pro Performance Head Gaskets

 

Air,Fuel,Camshaft
  • Comp Cams Xtreem Energy 286/292 Solid Roller Camshaft  (248/254 duration @ .050 & .576/.582 lift)
  • Crower Severy Duty Maximus .903" HIPPO (high pressure pin oiling) solid roller lifters ( a must for solid street applications )
  • Comp Cams 1.5 Ultra Pro Magnum Shaft Mount Roller Rocker Arms (lifetime guarantee)
  • Comp Cams Magnum Pushrods
  • Engine Works Pro Billet Double roller timing set
  • Chrome Timing Cover
  • Edelbrock Performer RPM Intake
  • Fel Pro Intake Gaskets & Valley Pan with new valley pan support bars
  • Quick Fuel 850cfm Carburetor

 

Ignition
  • MSD Pro Billet Distributor
  • MSD 8.5mm Spark Plug Wires
  • NGK Spark Plugs
  • Mr Gasket Chrome Distributor Hold Down
  • Mopar Performance Distributor Drive w/ Bronze Gear

 

Also Included
  • Mopar Performance Black Aluminum Valve Covers
  • New  7qt oil pan 7" deep & oil pump pick up
  • Melling  high pressure oil pump
  • Melling  Hardened 1 piece oil pump shaft  
  • Fel-Pro oil pan,timing cover,valve cover gaskets  
  • PowerBond Harmonic Balancer
  • Mopar Performance Balancer Bolt
  • Mr Gasket Timing Tab Pointer 
  • All new oil pan,timing cover,valve cover,& intake bolts
  • 10.5:1 compression for premium pump gas compatiable
  • Engine makes 560hp @ 5500 horsepower and 600 ft lbs of torque @ 4000

 

Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines to others it would be like apples to oranges. They just aren't the same.

Engine includes 1 year warranty & lifetime customer service!

 Once purchased engine usually ships in 6-8 weeks time.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.