Questions? 931-815-3260

Chrysler 383 Stroker Crate Engine FAST EZ-EFI 489cid 530 HP

Be the first to review this product

Availability: In stock

$17,400.00
OR

Quick Overview

Mopar Chrysler Dodge Plymouth 383 Stroker 489 Complete Crate Engine with FAST EZ-2.0 EFI. Dyno Tested 530 HP Turn Key Motor.






383 Mapar EFI

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 383 Mapar EFI
  • Thermal Clean Big Block Mopar
  • Boring BB Mopar Block
  • Totque Plate Hone
  • Align Hone 440 Block
  • Decking 440 Block
  • Computer Balancing
  • 500 Mopar w/ FAST EZ-EFI
  • FAST EZ-EFI

Details

This engines specifications with top of line high QUALITY parts

 
Mopar Chrysler Dodge 383 block

  • Thermal cleaned and shot peened
  • Sonic Tested For Cylinder Wall Thickness
  • Magnafluxed
  • Bored 4.280"
  • Torque plate honed (represents head being torqued to block)
  • Align honed (main bore housing where crank goes)
  • Decked for flat head surface  
  • New Clevite cam bearings installed
  • New Brass freeze plugs installed
  • New oil galley plugs installed
  • New Dowels Installed
  • Painted Color Choice

 

Rotating assembly

  • 4340 Steel 4.250" stroke internal balance crankshaft
  • H- beam 6.535 " 4340 rods
  • Clevite Rod & Main Bearings
  • Diamond Forged Pistons
  • Total Seal Molly rings
  • All Rods & Pistons matched & machined to same weight (big & small ends as well as total weight)
  • Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)
  • New Rear Main Seal Retain Plate

 

  
Edelbrock Performer RPM Aluminum Cylinder Heads

  • 84cc combustion chambers
  • 210cc intake runners
  • Bronze valve guides
  • Hardened valve seats
  • Straight plug design
  • 2.140" and 1.810"  Stainless Steel  valves
  • Teflon valve seals
  • Matching roller springs,hardened retainers,and hardened keepers to camshaft
  • ARP Head Bolts
  • Fel-Pro Performance Head Gaskets

 

Air,Fuel,Camshaft
  • Comp Cams Hydraulic Roller Camshaft 
  • Comp Cams Hydraulic roller lifters  
  • Comp Cams 1.5 Ultra Pro Magnum Shaft Mount Roller Rocker Arms (lifetime guarantee)
  • Comp Cams Magnum Pushrods
  • Billet Double roller timing set
  • Chrome Timing Cover
  • Edelbrock Performer RPM Intake 
  • Fel Pro Intake Gaskets & Valley Pan with new valley pan support bars
  • FAST EZ-EFI 2.0 Fuel Injection System
  • FAST Fuel Pump Kit

 

Ignition

  • MSD Pro Billet Distributor
  • MSD 8.5mm Spark Plug Wires
  • NGK Spark Plugs
  • Mr Gasket Chrome Distributor Hold Down
  • Mopar Performance Oil Pump Drive w/ Bronze Gear

 

Also Included

  • Mopar Performance Black Aluminum Valve Covers
  • Alminum push in breathers
  • New  7qt oil pan 7" deep & oil pump pick up
  • Melling  high pressure oil pump 
  • Fel-Pro oil pan,timing cover,valve cover gaskets  
  • Professional Products  Harmonic Balancer
  • Mopar Performance Balancer Bolt
  • Mr Gasket Timing Tab Pointer 
  • All new oil pan,timing cover,valve cover,& intake bolts
  • 10.5:1 compression for premium pump gas compatible
  • Engine makes 530hp @ 5300 horsepower and 600 ft lbs of torque @ 3900

 

Picture shown with optional serpentine kit

This engine will be Dyno Tested and run through the break in process.We will have it tuned in with the correct timing.ECU will be calibrated for performance as well as drivability.

Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines to others it would be like apples to oranges. They just aren't the same.

Engine includes 1 year warranty & lifetime customer service!

Once purchased engine usually ships in 6-8 weeks time (excluding factory backorders)


With the EZ-EFI® from FAST™, you don’t need a laptop or tuning experience – it does the work for you



 

In the past, carburetor-to-EFI conversion was no picnic. At the very least, you would need a laptop and significant tuning experience. But thanks to FAST™ engineers, those days are over. With the new EZ-EFI® Self Tuning Fuel Injection System, you get patent-pending EFI technology that does all the work for you. Simply hook it up, answer the basic setup Wizard questions on the included hand-held display, and the system tunes itself as you drive!

The new EZ-EFI® Self Tuning Fuel Injection System provides you with the complete EFI package, including the ECU, wide-band O2 sensor, wiring harness, fuel injectors, an optional fuel pump kit and other assorted components, including the innovative 4150 Throttle Body from FAST™. This cast throttle body gives you the total package for your existing 4150-type manifold and comes with everything, including the appropriate fuel injectors and fuel rails.

Regardless of your brand or size, this system bolts-on easily to any carbureted engine with up to 600 horsepower – NO manifold replacement needed. In addition to matching any carbureted manifold, the EZ-EFI® Self Tuning Fuel Injection System also works with your original carbstyle throttle linkage and is ready to accept all OEM sensors. The EZ-EFI® can be installed easily in an afternoon and is a “must have” for your street rod or muscle car.

Self-tuning system — NO tuning experience or laptop needed
Complete system includes mini ECU, wide-band O2 sensor, wiring harness, injectors, fuel pump kit & 4150 throttle body
4150 throttle body works with original carb-style linkage & accepts all OEM sensors
Bolts on to any engine under 600 hp, regardless of brand or size; the perfect choice for street rods & muscle cars
Easy-to-use setup Wizard provides a comprehensive walk-through & system tunes itself

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.