931-815-3260 Mon - Thurs 6:30 A.M - 5:30 P.M. CST

Chevy Fuel Injected 454 Stroker Turn Key Crate Engine 600 HP 87 Octane Fuel Compatible

Be the first to review this product

Availability: In stock


Quick Overview

Chevrolet 454 Stroker 489 or 496 cubic inch Turn Key Crate Engine with FAST XFI Fuel Injection making 600hp on 87 Octane Pump Gas

Fuel Injected 454 Stroker

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Fuel Injected 454 Stroker
  • 454 Engine Block Boring
  • 454 Torque Plate Hone
  • 454 Decking
  • 454 Computer  Balance
  • BBC Degree Camshaft
  • BBC Short Block
  • BBC Short Block
  • Fuel Injected 454 Stroker


This engines specifications with top of line high QUALITY parts
New GM 454 4 bolt main block with 1 piece rear main
  • Bored  (centered with mains)
  • Torque plate honed (represents head being torqued to block)
  • Align honed (main bore housing where crank goes)
  • Square Decked for flat head surface & correct deck height
  • New cam bearings installed
  • New freeze plugs installed
  • All New oil galley plugs installed
  • Painted Color Choice
Rotating assembly
  • Eagle 4340 Steel 4.250" stroke crankshaft
  • Eagle  H-beam 6.385"rods
  • Clevite Main Bearings
  • Mahle Forged 9.0:1 Compression Pistons  Compression 87 Octane Fuel Compatible
  • Mahle Molly file fit rings
  • All Rods big & small ends and Pistons machined to same weight
  • Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)
Brodix BB-2 Aluminum Cylinder Heads
  • Bronze valve guides
  • Hardened valve seats
  • 305cc intake runners
  • 119cc Combustion Chambers
  •  2.250" and 1.880" Sever Duty Stainless Steel valves
  • Matching roller springs, retainers,and hardened keepers to roller camshaft
Camshaft specs


  • Comp Cams Custom Hydraulic Street Roller Cam 
  • Comp Cams Hydraulic Roller Lifters  
  • Brodix7/16 Screw in studs
  • Brodix Guide plates
  • ARP head bolts
  • Smith Brothers Pro Series 4130 .080" wall  pushrods
  • Comp Cams Ultra  Pro Magnum 1.7 full roller rocker arms with poly locks (LIFETIME GUARANTEE) 
  • Engine Works Pro Billet True Double roller timing set
  • ARP Main Studs


Fuel System
  • FAST XFI Complete Fuel Injection system
  • FAST 1000hp Fuel Pump System


Also included

  • Gen 5  oil pan with oil pump pick up
  • Melling High Pressure oil pump
  • Melling Hardened oil pump shaft
  • Roller Cam Button
  • Cam Bolts Locking Plate
  • All Fel-Pro Performance Gaskets
  • Chevrolet Slant Edge Aluminum Tall Valve Covers w/ baffles &
  • Billet Push in breathers
  • Proform GM performance chrome timing cover
  • Powerbond SFI  8" Harmonic Balancer
  • Chrome Timing Pointer
  • Mr Gasket  Balancer Bolt
  • Chrome Dipstick
  • All new oil pan,timing cover,& valve cover bolts
  • New oil filter adapter
  • Pro Billet Distributor
  • Chrome Distributor Hold Down
  • NGK Spark Plugs
  • Engine Works 8.5mm Megafire Plug Wires
  • The Brad Penn Oil will be removed for shipping purposes
  • Engine makes 600 horsepower @ 6400 RPM and 550 ft lbs of torque @ 5500 RPM on 87 Octane pump gas!

This engine is Dyno Tested and run through the break in process.We will have the carburetor jetted & tuned in with the correct timing set.


Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines to others it would be like apples to oranges. They just aren't the same.

Engine includes 1 year warranty & lifetime customer service!

Once purchased engine usually ships in 6-8 weeks time (excluding factory backorders)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.