931-815-3260 Mon - Thurs 6:30 A.M - 5:30 P.M. CST

*******Mopar Pro Race Turn Key Crate Engine 572 Wedge 1000 HP

Be the first to review this product

Availability: Out of stock


Quick Overview

Mopar 572 Wedge Pro Race Turn Key Crate Engine 1000hp

Mopar 572 Wedge Pro Race Turn Key Crate Engine

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Mopar 572 Wedge Pro Race Turn Key Crate Engine


This engines specifications
New World Products Race Series 4-bolt main siamese block
  • Bore 4.500"
  • Torque plate honed (represents head being torqued to block)
  • New Clevite cam bearings installed
  • New Brass freeze plugs installed
  • All New oil galley plugs installed
  • Painted with High Heat Paint (color choice)


Rotating assembly
  • Crower 4340 Steel 4.500" stroke crankshaft
  • GRP Pro Series  Billet Aluminum  7.500"rods
  • Clevite Race Series  Rod &  Main Bearings
  • Racetec  Custom 4.500"  Pistons
  • Total Seal rings
  • All Rods big & small ends and Pistons machined to same weight
  • Rotating assembly balanced to race specs with printed spec sheet(.02 of oz. inch or within 2 grams)


Brodix B1 MO 3151000 15° Cylinder Heads
  • 68cc combustion chambers
  • 300cc intake runners
  • Bronze valve guides
  • Hardened valve seats
  • 2.300" and 1.780" Severe Duty Stainless valves
  • Matching Manley roller valve springs,Titanium retainers,and 10°hardened keepers
  • ARP Head Studs


Camshaft specs
  • LSM Solid 4-7 swap Custom Roller Cam
  • Comp Cams Offset Endure-X Solid Roller Lifters
  • Smith Brothers Custom hardened pushrods
  • Jesel Pro Series Shaft Mounter Rocker Arms
  • Jesel Belt Drive timing set & cover


Fuel System
  • Quick Fuel QFX 1450 cfm Carburetor
  • Brodix B1 Intake
  • ARP Carburetor Studs


Also included

  • Milodon 31160 10qt  6"deep Drag Race oil pan
  • Milodon 21175 Dual External Oiling System
  • Milodon Hardened oil pump shaft w/bronze gear
  • Fel-Pro Performance Head Gaskets
  • Fel-Pro Performance Timing Cover Gaskets & Rear Main Gasket
  • Fel-Pro Performance  Intake Gaskets & valve cover gaskets
  • Milodon Crushproof  Oil Pan Gasket
  • Brodix B1 Aluminum Tall Valve Covers
  • PowerBond SFI Approved Harmonic Balancer
  • ARP Balancer Bolt
  • All new stainless steel oil pan,timing cover,& intake bolts


It will include

  • MSD  Pro Billet Distributor
  • NGK Spark Plugs
  • MSD  8.5mm Super Conductor Plug Wires
  • The Brad Penn Oil will be removed for shipping purposes

This engine is Dyno Tested and run through the break in process.We will have the carburetor jetted & tuned in with the correct timming set.

Engine makes 1000 horsepower @ 7200 RPM and 795 ft lbs of torque @ 5900 RPM


Engine is professional race prep assembled in controlled environment.  Each engine is pre-assembled to check all tolerances on each bearing, crank journal, end play.  Piston clearance on cylinder,  piston to valve,  & deck clearance checked & set.  Head cc's are checked.  Each engine has the static & dynamic compression ratio set for maximum horsepower with desired fuel octane. Camshaft degree set along with correct  valve train geometry.  Oil pump pickup clearance set for proper oiling.  Each bolt is torqued to proper specifications using top quality calibrated torque wrench.  We also take pride in a great paint job on each engine for the best look in your vehicle.  You can not compare our engines tp others it would be like apples to oranges. They just aren't the same.


Once purchased engine usually ships in 6-8 weeks time (excluding factory backorders)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.